root/cgm/trunk/test

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Rev Chgset Date Author Log Message
(edit) @3274 [3274] 3 weeks hongjun o partest can deal with default input cases o "Moto.brep" geometry file is …
(edit) @3210 [3210] 5 weeks tautges Updating cgm init process in tests; better reference to .la file in itaps …
(edit) @3170 [3170] 2 months kraftche for 'make clean', remove itaps/testout.sat and mmgr.log files resulting …
(edit) @3159 [3159] 2 months sjackson Tell svn to ignore all the unversioned files produced by autoreconf -fi
(edit) @2855 [2855] 7 months janehu Added test for tweak_move surface.
(edit) @2852 [2852] 7 months janehu Reverse un-intended check in.
(edit) @2851 [2851] 7 months janehu Added a test for tweak_move curves.
(edit) @2847 [2847] 7 months janehu Not intended to change.
(edit) @2846 [2846] 7 months janehu Updated the makept for closest point location.
(edit) @2829 [2829] 7 months janehu Added assertions for auto-test, have posted a fix to opencascade source …
(edit) @2822 [2822] 7 months janehu Hopefully fixed the nightly test for 32 bit build.
(edit) @2818 [2818] 7 months janehu Added assertions for auto-testing.
(edit) @2816 [2816] 7 months janehu Added asserts for testcases to detect possible test failures.
(edit) @2800 [2800] 8 months kraftche Add test to verify correct topology constuction and querying. Make a …
(edit) @2792 [2792] 8 months janehu updated for brep files format of having attributes.
(edit) @2765 [2765] 8 months janehu Added a check on chamfer with different cutting distance.
(edit) @2764 [2764] 8 months janehu fixed the nightly build problem.
(edit) @2758 [2758] 8 months janehu Added testing on fillet/chamfer sheet body.
(edit) @2755 [2755] 8 months janehu Fixed the nightly test failure.
(edit) @2747 [2747] 8 months janehu Added tests on fillet/chamfer on vertices. Fillet on sheet body hasn't …
(edit) @2741 [2741] 8 months janehu Remove fillet.occ from make clean and making tarball.
(edit) @2730 [2730] 8 months janehu Added ref_edges number check for a convinent read of the test result.
(edit) @2728 [2728] 8 months janehu Added test for fillet and chamfer, in OCC, there's no concept of blend in …
(edit) @2685 [2685] 9 months janehu Added two files to be removed after testing.
(edit) @2684 [2684] 9 months janehu change the file names from .brep to .occ, I think distclean only has occ …
(edit) @2676 [2676] 9 months janehu Added bounding-box check for generated prism and pyramid, the key of them …
(edit) @2672 [2672] 9 months janehu Passed test on pyramid making function.
(edit) @2667 [2667] 9 months janehu Added test for makeing prism. working just like Acis.
(edit) @2523 [2523] 11 months kraftche fix distcheck failure: clean up test output files for 'make clean'
(edit) @2508 [2508] 11 months janehu Added tests for webcut function.
(edit) @2507 [2507] 11 months janehu Added tests to create multiple mid-planes.
(edit) @2505 [2505] 11 months janehu Added tests for get_mid_plane function.
(edit) @2491 [2491] 11 months janehu Changed to not reporting failure because of expected ERROR 's.
(edit) @2487 [2487] 11 months janehu updated testcase for solid model read-in for iges file and export into …
(edit) @2485 [2485] 11 months kraftche simplify file extension checking (just as something to checkin so I can be …
(edit) @2484 [2484] 11 months janehu Added some simple test cases for importing iges and step files.
(edit) @2479 [2479] 12 months kraftche put back accidentally removed 'unite4.occ'
(edit) @2475 [2475] 12 months janehu Solved the problem of crashing after Draw command.
(edit) @2466 [2466] 12 months kraftche Clean up mess with test output files. Files created by tests should *not* …
(edit) @2465 [2465] 12 months kraftche add missing test input file: fixes broken 'make dist'
(edit) @2297 [2297] 12 months janehu Changes to fix the nightly test problem. will continue to test on …
(edit) @2293 [2293] 12 months janehu modified to reflect the correct free_entities after a body deletion …
(edit) @2287 [2287] 12 months janehu Modified the file according to changes on OCCModifyEngine.cpp.
(edit) @2280 [2280] 12 months janehu Hollow command left undeletable free entities, debuging on it.
(edit) @2279 [2279] 12 months janehu Modified to correctly tessellate a curve.
(edit) @2272 [2272] 12 months janehu Added test for acr_curve generation from bug report of user.
(edit) @2265 [2265] 12 months janehu Remove unnessecary warnings from compiling.
(edit) @2247 [2247] 12 months kraftche fix link flags for tests, and run webcut test for cubit-based build
(edit) @2220 [2220] 13 months janehu updated modify.cpp according to creation changes.
(edit) @2210 [2210] 13 months janehu beforesub.occ is local generated file, so argument should be true.
(edit) @2208 [2208] 13 months janehu Fixed for night testing failure for reading import file.changed the …
(edit) @2201 [2201] 13 months janehu Added returning body for the sweep_along_curve interface in geom level and …
(edit) @2199 [2199] 13 months tautges - changed 'WITH_OCC' to 'build_OCC' to make consistent with ACIS - added …
(edit) @2198 [2198] 13 months tautges - Included several $(HAVE_OCC)'s in DEFS in several subdirs (Jason, …
(edit) @2195 [2195] 13 months kraftche Fix test: o Look in corret place for input file when compiling in …
(edit) @2194 [2194] 13 months kraftche add missing LD_FLAGS for test_occ
(edit) @2187 [2187] 13 months tautges Changes so that 'make check' will run with cgm-on-cubit. Don't know if …
(edit) @2175 [2175] 13 months janehu Finished testing for sweep_rotational for face and curve.
(edit) @2174 [2174] 13 months janehu sweep_rotational passed surface rotational-swept, closed-curve …
(edit) @2157 [2157] 13 months kraftche fix typo: backslash does not escape newline if there is whitespace between …
(edit) @2153 [2153] 13 months janehu Added OCC sweep_perpendicular function, passed test.
(edit) @2144 [2144] 13 months janehu Added testcase from Serge Gosselin and code for sweep_tran slational and …
(edit) @2111 [2111] 14 months janehu Not like in OCC, the solid body got hollowed, hence the volume get …
(edit) @2110 [2110] 14 months janehu Added hollow function in ACIS engine, passed test.
(edit) @2099 [2099] 14 months janehu Added hollow interface for OCC in GeometryModifyTool?, updated test cases, …
(edit) @2094 [2094] 14 months janehu Changes for upgrading system to OpenCascade? 6.3.
(edit) @2066 [2066] 14 months janehu Changed the test case to make a correct call.
(edit) @2059 [2059] 15 months janehu Added flip_normals function in OCCModifyEngine, and passed test cases.
(edit) @2056 [2056] 15 months janehu Added the unite test cases into the distribution list.
(edit) @2055 [2055] 15 months janehu updated test cases for unite operation to see the name changes with the …
(edit) @2047 [2047] 15 months kraftche fix search path for input file
(edit) @2046 [2046] 15 months kraftche include test input files in tarball
(edit) @2043 [2043] 15 months janehu Coedge wasn't cleaned totally when deleting, fixed this bug,updated …
(edit) @2038 [2038] 16 months janehu Added similiar function of split_owner as Acis, updated the test case.
(edit) @2035 [2035] 16 months janehu Added a testcase for read and write attributes.
(edit) @1984 [1984] 17 months kraftche remove some lines that are no longer necessary
(edit) @1981 [1981] 17 months kraftche o Combine all compiled libraries (except SIDL stuff) into a single …
(edit) @1920 [1920] 17 months janehu test passed thick body generation except for the ref_face's number seems …
(edit) @1911 [1911] 17 months janehu Tested on unite operation, BRepAlgoAPI_Fuse seems to have problems with …
(edit) @1906 [1906] 17 months janehu Tested chop operation and added Unite operation.
(edit) @1891 [1891] 18 months janehu Test-passed one case of imprint-project-curve. project curvecould return …
(edit) @1883 [1883] 18 months janehu Test-passed using point to split curve on body.
(edit) @1874 [1874] 18 months janehu fixed the Error of Edge with no vertices problem after impriinting, when …
(edit) @1863 [1863] 18 months janehu Test-passed edge imprint on surface.
(edit) @1846 [1846] 18 months janehu don't need to define OCC yet.
(edit) @1845 [1845] 18 months janehu don't need to define OCC yet.
(edit) @1844 [1844] 18 months janehu double checked that OCC make_planar works for the test, and changed it …
(edit) @1833 [1833] 18 months janehu updated testcase for body-body imprint through GeometryModifyTool? …
(edit) @1831 [1831] 18 months janehu Fixed the infinite loop problem, fixed a bug in making spline.
(edit) @1830 [1830] 18 months kraftche Fix bugs in previous commit: o Wrong arg type passed to printf-like …
(edit) @1824 [1824] 18 months janehu fixed makept errors, still need one more test on making a spline to pass.
(edit) @1822 [1822] 18 months kraftche configure.in: o set HAVE_OCC_DEF="-DHAVE_OCC" if building with OCC …
(edit) @1809 [1809] 19 months janehu made sure that stitch surfaces and subtract operation don't generate …
(edit) @1807 [1807] 19 months janehu Solved the memory leak problem, passed subtract operation test, in which …
(edit) @1752 [1752] 20 months kraftche fix automake warning
(edit) @1743 [1743] 20 months janehu Succeeded in doing body body imprinting, test passed.
(edit) @1710 [1710] 20 months janehu Added for cylinder function to create a ellipse based cone;test passed …
(edit) @1671 [1671] 21 months janehu Added subtract function and tested on it. with imprint not available now, …
(edit) @1649 [1649] 21 months janehu Modified model import/export code to work with shell bodies,standalone …
(edit) @1640 [1640] 21 months janehu Fine tuned stitch_surfs; Added test case for it.
Note: See TracRevisionLog for help on using the revision log.