Changes between Version 1 and Version 2 of TracModPython

11/06/17 14:13:44 (6 years ago)



  • TracModPython

    v1 v2  
    44Trac supports [ mod_python], which speeds up Trac's response times considerably, especially compared to [TracCgi CGI], and permits use of many Apache features not possible with [wiki:TracStandalone tracd]/mod_proxy. 
    6 == Simple configuration == 
     6{{{#!div class="important" 
     7** A Word of Warning ** 
     9As of 16^th^ June 2010, the mod_python project is officially dead.  If you are considering using mod_python for a new installation, '''please don't'''!  There are known issues which will not be fixed and there are now better alternatives.  Check out the main TracInstall pages for your target version for more information. 
     13These instructions are for Apache 2; if you are still using Apache 1.3, you may have some luck with [trac:wiki:TracModPython2.7 TracModPython2.7], but you'll be totally on your own. 
     17== Simple configuration: single project == #Simpleconfiguration 
    819If you just installed mod_python, you may have to add a line to load the module in the Apache configuration: 
    13  ''Note: The exact path to the module depends on how the HTTPD installation is laid out.'' 
    15 You can test your mod_python installation by adding the following to your httpd.conf.  You should remove this when you are done testing for security reasons. 
    16 {{{ 
     24''Note: The exact path to the module depends on how the HTTPD installation is laid out.'' 
     26On Debian using apt-get 
     28apt-get install libapache2-mod-python libapache2-mod-python-doc 
     30(Still on Debian) after you have installed mod_python, you must enable the modules in apache2 (equivalent of the above Load Module directive): 
     32a2enmod python 
     34On Fedora use, using yum: 
     36yum install mod_python 
     38You can test your mod_python installation by adding the following to your httpd.conf.  You should remove this when you are done testing for security reasons. Note: mod_python.testhandler is only available in mod_python 3.2+. 
    1741<Location /mpinfo> 
    1842   SetHandler mod_python 
     43   PythonInterpreter main_interpreter 
    1944   PythonHandler mod_python.testhandler 
     45   Order allow,deny 
     46   Allow from all 
    2350A simple setup of Trac on mod_python looks like this: 
    2553<Location /projects/myproject> 
    2654   SetHandler mod_python 
     55   PythonInterpreter main_interpreter 
    2756   PythonHandler trac.web.modpython_frontend  
    2857   PythonOption TracEnv /var/trac/myproject 
    2958   PythonOption TracUriRoot /projects/myproject 
    30 </Location> 
    31 }}} 
    33 The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration with out it, and if the URLs produced by Trac look wrong or if Trac does not seem to recognize the URLs correctly, add the '''`TracUriRoot`''' option.  You will notice that the `Location` and '''`TracUriRoot`''' have the same path. 
     59   Order allow,deny 
     60   Allow from all 
     64The option '''`TracUriRoot`''' may or may not be necessary in your setup. Try your configuration without it; if the URLs produced by Trac look wrong, if Trac does not seem to recognize URLs correctly, or you get an odd "No handler matched request to..." error, add the '''`TracUriRoot`''' option.  You will notice that the `Location` and '''`TracUriRoot`''' have the same path. 
     66The options available are 
     68    # For a single project 
     69    PythonOption TracEnv /var/trac/myproject 
     71    # For multiple projects 
     72    PythonOption TracEnvParentDir /var/trac/myprojects 
     74    # For the index of multiple projects 
     75    PythonOption TracEnvIndexTemplate /srv/www/htdocs/trac/project_list_template.html 
     77    # A space delimitted list, with a "," between key and value pairs. 
     78    PythonOption TracTemplateVars key1,val1 key2,val2 
     80    # Useful to get the date in the wanted order 
     81    PythonOption TracLocale en_GB.UTF8 
     83    # See description above         
     84    PythonOption TracUriRoot /projects/myproject 
     87=== Python Egg Cache === 
     89Compressed python eggs like Genshi are normally extracted into a directory named `.python-eggs` in the users home directory. Since apache's home usually is not writable an alternate egg cache directory can be specified like this: 
     91PythonOption PYTHON_EGG_CACHE /var/trac/myprojects/egg-cache 
     94or you can uncompress the Genshi egg to resolve problems extracting from it. 
    3596=== Configuring Authentication === 
    37 Configuring authentication works just like for [wiki:TracCgi#AddingAuthentication CGI]: 
    38 {{{ 
    39 <Location "/projects/myproject/login"> 
    40   AuthType Basic 
    41   AuthName "myproject" 
    42   AuthUserFile /var/trac/myproject/.htpasswd 
    43   Require valid-user 
    44 </Location> 
    45 }}} 
     98See corresponding section in the [wiki:TracModWSGI#ConfiguringAuthentication] page. 
     101== Advanced Configuration 
     103=== Setting the Python Egg Cache === 
     105If the Egg Cache isn't writeable by your Web server, you'll either have to change the permissions, or point Python to a location where Apache can write. This can manifest itself as a ''500 internal server error'' and/or a complaint in the syslog.  
     109<Location /projects/myproject> 
     110  ... 
     111  PythonOption PYTHON_EGG_CACHE /tmp  
     112  ... 
    47117=== Setting the !PythonPath === 
    49119If the Trac installation isn't installed in your Python path, you'll have to tell Apache where to find the Trac mod_python handler  using the `PythonPath` directive: 
    51122<Location /projects/myproject> 
    52123  ... 
    58129Be careful about using the !PythonPath directive, and ''not'' `SetEnv PYTHONPATH`, as the latter won't work. 
    60 == Setting up multiple projects == 
     131=== Setting up multiple projects === 
    62133The Trac mod_python handler supports a configuration option similar to Subversion's `SvnParentPath`, called `TracEnvParentDir`: 
    64136<Location /projects> 
    65137  SetHandler mod_python 
     138  PythonInterpreter main_interpreter 
    66139  PythonHandler trac.web.modpython_frontend  
    67140  PythonOption TracEnvParentDir /var/trac 
    74147If you don't want to have the subdirectory listing as your projects home page you can use a 
    76150<LocationMatch "/.+/"> 
    81155You can also use the same authentication realm for all of the projects using a `<LocationMatch>` directive: 
    83158<LocationMatch "/projects/[^/]+/login"> 
    84159  AuthType Basic 
    91 == Virtual Host Configuration == 
     166=== Virtual Host Configuration === 
    93168Below is the sample configuration required to set up your trac as a virtual server (i.e. when you access it at the URLs like 
    97173<VirtualHost * > 
    98     DocumentRoot /var/trac/myproject 
     174    DocumentRoot /var/www/myproject 
    99175    ServerName 
    100176    <Location /> 
    101177        SetHandler mod_python 
     178        PythonInterpreter main_interpreter 
    102179        PythonHandler trac.web.modpython_frontend 
    103180        PythonOption TracEnv /var/trac/myproject 
     192This does not seem to work in all cases. What you can do if it does not: 
     193 * Try using `<LocationMatch>` instead of `<Location>` 
     194 * <Location /> may, in your server setup, refer to the complete host instead of simple the root of the server. This means that everything (including the login directory referenced below) will be sent to python and authentication does not work (i.e. you get the infamous Authentication information missing error). If this applies to you, try using a sub-directory for trac instead of the root (i.e. /web/ and /web/login instead of / and /login). 
     195 * Depending on apache's `NameVirtualHost` configuration, you may need to use `<VirtualHost *:80>` instead of `<VirtualHost *>`. 
    115197For a virtual host that supports multiple projects replace "`TracEnv`" /var/trac/myproject with "`TracEnvParentDir`" /var/trac/ 
     199Note: !DocumentRoot should not point to your Trac project env. As Asmodai wrote on #trac: "suppose there's a webserver bug that allows disclosure of !DocumentRoot they could then leech the entire Trac environment". 
    117201== Troubleshooting == 
    119203In general, if you get server error pages, you can either check the Apache error log, or enable the `PythonDebug` option: 
    121206<Location /projects/myproject> 
    122207  ... 
     212For multiple projects, try restarting the server as well. 
     214=== Login Not Working === 
     215If you've used `<Location />` directive, it will override any other directives, as well as `<Location /login>`. 
     216The workaround is to use negation expression as follows (for multi project setups): 
     219#this one for other pages 
     220<Location ~ "/*(?!login)"> 
     221   SetHandler mod_python 
     222   PythonHandler trac.web.modpython_frontend 
     223   PythonOption TracEnvParentDir /projects 
     224   PythonOption TracUriRoot / 
     227#this one for login page 
     228<Location ~ "/[^/]+/login"> 
     229   SetHandler mod_python 
     230   PythonHandler trac.web.modpython_frontend 
     231   PythonOption TracEnvParentDir /projects 
     232   PythonOption TracUriRoot / 
     234   #remove these if you don't want to force SSL 
     235   RewriteEngine On  
     236   RewriteCond %{HTTPS} off 
     237   RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} 
     239   AuthType Basic 
     240   AuthName "Trac" 
     241   AuthUserFile /projects/.htpasswd 
     242   Require valid-user 
     246=== Expat-related segmentation faults === #expat 
     248This problem will most certainly hit you on Unix when using Python 2.4. 
     249In Python 2.4, some version of Expat (an XML parser library written in C) is used,  
     250and if Apache is using another version, this results in segmentation faults. 
     251As Trac 0.11 is using Genshi, which will indirectly use Expat, that problem 
     252can now hit you even if everything was working fine before with Trac 0.10. 
     254See Graham Dumpleton's detailed [ explanation and workarounds] for the issue. 
    127256=== Form submission problems === 
    135264Using <Location /> together with `SetHandler` resulted in having everything handled by mod_python, which leads to not being able download any CSS or images/icons. I used <Location /trac> `SetHandler None` </Location> to circumvent the problem, though I do not know if this is the most elegant solution. 
     266=== Problem with zipped egg === 
     268It's possible that your version of mod_python will not import modules from zipped eggs. If you encounter an `ImportError: No module named trac` in your Apache logs but you think everything is where it should be, this might be your problem. Look in your site-packages directory; if the Trac module appears as a ''file'' rather than a ''directory'', then this might be your problem. To rectify, try installing Trac using the `--always-unzip` option, like this: 
     271easy_install --always-unzip 
    137274=== Using .htaccess === 
    141278It may be possible to work around this with mod_rewrite, but I failed to get this working. In all, it is more hassle than it is worth. Stick to the provided instructions. :) 
    143 === Win32 Issues === 
     280A success story: For me it worked out-of-box, with following trivial config: 
     282SetHandler mod_python 
     283PythonInterpreter main_interpreter 
     284PythonHandler trac.web.modpython_frontend  
     285PythonOption TracEnv /system/path/to/this/directory 
     286PythonOption TracUriRoot /path/on/apache 
     288AuthType Basic 
     289AuthName "ProjectName" 
     290AuthUserFile /path/to/.htpasswd 
     291Require valid-user 
     294The `TracUriRoot` is obviously the path you need to enter to the browser to get to the trac (e.g. domain.tld/projects/trac) 
     296=== Additional .htaccess help === 
     298If you are using the .htaccess method you may have additional problems if your trac directory is inheriting .htaccess directives from another.  This may also help to add to your .htaccess file: 
     301<IfModule mod_rewrite.c> 
     302  RewriteEngine Off 
     306=== Platform specific issues 
     307==== Win32 Issues ==== 
    144308If you run trac with mod_python < 3.2 on Windows, uploading attachments will '''not''' work. This problem is resolved in mod_python 3.1.4 or later, so please upgrade mod_python to fix this. 
    146 === OS X issues === 
     311==== OS X issues ==== 
    148313When using mod_python on OS X you will not be able to restart Apache using `apachectl restart`. This is apparently fixed in mod_python 3.2, but there's also a patch available for earlier versions [ here]. 
    150 === SELinux issues === 
     315==== SELinux issues ==== 
    152317If Trac reports something like: ''Cannot get shared lock on db.lock'' 
    159 See also [[]] 
    161 === FreeBSD issues === 
     324See also [] 
     326==== FreeBSD issues ==== 
    162327Pay attention to the version of the installed mod_python and sqlite packages. Ports have both the new and old ones, but earlier versions of pysqlite and mod_python won't integrate as the former requires threaded support in python, and the latter requires a threadless install. 
     329If you compiled and installed apache2, apache wouldn´t support threads (cause it doesn´t work very well on FreeBSD). You could force thread support when running ./configure for apache, using --enable-threads, but this isn´t recommendable. 
     330The best option [ seems to be] adding to /usr/local/apache2/bin/ennvars the line  
     333export LD_PRELOAD=/usr/lib/ 
     337==== Fedora 7 Issues ==== 
     338Make sure you install the 'python-sqlite2' package as it seems to be required for TracModPython but not for tracd 
    164341=== Subversion issues === 
    168345If this is not the case, it's possible that you're using Subversion libraries that are binary incompatible with the apache ones (an incompatibility of the `apr` libraries is usually the cause). In that case, you also won't be able to use the svn modules for Apache (`mod_dav_svn`). 
     347You also need a recent version of `mod_python` in order to avoid a runtime error ({{{argument number 2: a 'apr_pool_t *' is expected}}}) due to the default usage of multiple sub-interpreters. 3.2.8 ''should'' work, though it's probably better to use the workaround described in [trac:#3371 #3371], in order to force the use of the main interpreter: 
     349PythonInterpreter main_interpreter 
     351This is anyway the recommended workaround for other well-known issues seen when using the Python bindings for Subversion within mod_python ([trac:#2611 #2611], [trac:#3455 #3455]). See in particular Graham Dumpleton's comment in [trac:comment:9:ticket:3455 #3455] explaining the issue. 
     353=== Page layout issues === 
     355If the formatting of the Trac pages look weird chances are that the style sheets governing the page layout are not handled properly by the web server. Try adding the following lines to your apache configuration: 
     358Alias /myproject/css "/usr/share/trac/htdocs/css" 
     359<Location /myproject/css> 
     360    SetHandler None 
     364Note: For the above configuration to have any effect it must be put after the configuration of your project root location, i.e. {{{<Location /myproject />}}}. 
     366Also, setting `PythonOptimize On` seems to mess up the page headers and footers, in addition to hiding the documentation for macros and plugins (see #Trac8956). Considering how little effect the option has, it is probably a good idea to leave it `Off`. 
     368=== HTTPS issues === 
     370If you want to run Trac fully under https you might find that it tries to redirect to plain http. In this case just add the following line to your apache configuration: 
     373<VirtualHost * > 
     374    DocumentRoot /var/www/myproject 
     375    ServerName 
     376    SetEnv HTTPS 1 
     377    .... 
     382=== Segmentation fault with php5-mhash or other php5 modules === 
     383You may encounter segfaults (reported on debian etch) if php5-mhash module is installed. Try to remove it to see if this solves the problem. See debian bug report [] 
     385Some people also have troubles when using php5 compiled with its own 3rd party libraries instead of system libraries. Check here [] 
    171 See also TracGuide, TracInstall, TracCgi, TracFastCgi 
     388See also:  TracGuide, TracInstall, [wiki:TracModWSGI ModWSGI], [wiki:TracFastCgi FastCGI],  [trac:TracNginxRecipe TracNginxRecipe]